 |
| | | | | | Couplings | |  | | | | |
| Tyco Water manufactures and distributes a variety of styles of couplings. Information relating to these products is detailed below. For further information on these or other Tyco products, please contact your nearest Tyco Water Customer Centre.
To view the various documents, you require Adobe Acrobat Reader installed. Please download the latest reader by clicking here. |
| | | |  | |
Vari-Gib Couplings
Vari-Gib non-restrained mechanical couplings provide an effective method for connecting pipes with equal or unequal diameters. Vari-Gib couplings are manufactured with 316 Stainless Steel or Fusion Coated Ductile Iron Body & Flanges. The couplings are equipped with Nitrile Rubber Gaskets and 316 Stainless Steel or Galvanised Steel Fasteners. Please refer to the technical datasheet for product configurations.
|
Size Range |
DN40 – DN1200 |
|
Maximum Operation Pressure |
1600 kPa (up to and including DN600) |
|
Relevant Standard |
Manufactured to AS/NZS 4998 with accreditation pending |
Technical datasheet – Vari-Gib Couplings
Installation Instructions – Vari-Gib Couplings | |
| | | |  | |
High Pressure Couplings
High pressure dedicated OD mechanical pipe couplings provide an effective method of connecting pipes of equal or unequal diameters in a high pressure environment. Manufactured from mild steel with a fusion bonded epoxy coating. The couplings are equipped with 316 stainless steel bolts and nitrile rubber gaskets. Note that this product is not suitable for gas application.
|
Size Range |
DN150 – DN2000 |
|
Maximum Operation Pressure |
3500 kPa (up to and including DN1000) |
Technical datasheet – High Pressure Couplings
Installation Instructions – High Pressure Couplings | |
| | | | 
| |
EZIGIB Pipe Coupling
The EZIGIB non-restrained mechanical couplings, manufactured to WSA 105, provide a fast, effective method for connecting pipes with the same or different outside diameters. Utillizing two only double ended studs located on the crown of the coupling, it is capable of fitting quickly and in a smaller trench width than standard couplings. EZIGIB couplings are manufactured from Ductile Iron and Nitrile Rubber.
|
Size Range |
DN100 – DN200 |
|
Maximum Operation Pressure |
3500 kPa |
|
Relevant Standard |
WSA 105 |
Technical datasheet – EZIGIB Couplings | |
| | | | 
| |
MULTIGIB Blank End
The MULTIGIB mechanical blank end, manufactured to WSA 105, provides a fast, effective method for capping pipes. The MULTIGIB mechanical blank end is manufactured from Ductile Iron with an EPDM Rubber Seal, and Stainless Steel Fasteners.
|
Size Range |
DN80 – DN250 |
|
Maximum Operation Pressure |
1600 kPa |
|
Relevant Standard |
WSA 105 |
Technical datasheet under construction | |
| | | |
|
|
